All Dielectric Self Supported ADSS Fiber Optic Cable Double PE
Sheath 48 Cores
DESCRIPTION
All Dielectric Self-supporting Aerial Cable is These cables are constructed with a multiple tube filled with water
blocking jelly giving very high fiber
count up to 96 fiber stranded fiber optic cable, they form the
backbone of high speed networks. They give flexibility and
versatility to networks and can be used for duct applications.
FEATURES
1. Non metallic FRP strength members in the cable give it good
tensile strength.
2. water blocking jelly in the tube and tape over the tube give it excellent water and moisture
resistance.
3. Double sided PE sheath cable gives more excellent tensile strength, mechanical, rodent,
ultraviolet and environmental protection.
APPLICATIONS
They come in larger delivery length, so can also be used in long
distance communication system, building
interconnections, trunk lines, LAN, distribution networks.
PERFORMANCE
| Fiber Characteristic |
| Attenuation | 1310nm:≤0.35dB/km |
| 1550nm:≤0.21dB/km |
| Cutoff wavelength | When the cut-off wavelength of the optical fiber cable was tested
on a 22 m long cable sample, it was less than 1260 nm. |
| Bending characteristics | The attenuation characteristic test of 1550 nm was carried out
after loosening 100 turns from the bending radius of 37.5 mm, and
the attenuation increase value did not exceed 0.05 dB. |
| Mode field diameter | 1550nm : 10.4±0.5μm |
| 1310nm:9.1±0.4μm |
| Cladding diameter | 125±0.7μm |
| Cladding non-circularity | <1% |
| Mode length non-circularity | <6% |
| Coating diameter | 245±10 μm |
| Macro-bending radius | 100trun X 30mm @1625 nm | ≤0.05dB |
| Mode field/cladding concentricity deviation | ≤10μm |
| Mechanical and Enviromental test |
| Item | Test method | Acceptance Condition |
Tensile strength ( IEC60794-1-2-E1) | Load : 2700N | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Length of cable: about 50m |
| Load time : 1 Min |
| Crush test | Load : Short term crush(1100 N/cm) | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Load time : 1 Min |
| Impact test | Points of impact : 10 | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Times per point : 1 |
| Impact energy : 10J |
| Repeated bending | Bending dynamic radius : 20 D | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| NO. of cycle : 20 |
|
| Torsion | Length:1m | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| -Twist angle;±90° |
| -No. of cycle:10 |
| Water penetration | Height of water : 1m | No water leakage |
| Sample length:3m |
| Time :24 h |
| Temperature cycling | Temperature :-40~+70ºC | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Time of each step:24h |
| No. of cycle :1 |
| Drip test | 0~70 degree | No filling compound dripping |
| High pressure test | AC10KV , 50Hz | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
COMPANY PROFILE
SICHUAN JIANGHONG CABLE MANUFACTURE CO.,LTD,was founded in
1992,located in Jiangyou,Sichuan P.R.China.
BY 26 years development,company has become a modernized enterprise
focus on development,manufacture of different cables for radio and
TV network,Video monitoring network,FTTH communication and smart
home network.Based on advanced production equipment,the annual capacity has
reached up to 5 minllion km/year.
1. Experience:with more than 20 years production experience on
cable industry . certified supplier for broadcasting and
communication company in China domestic and overseas market .
2. Production line:supply different cables for radio and TV network
, Video monitoring network , FTTH communication ad smart home
network .
3. Certificate:Factory got ISO9001:2015 quality management
certificate. ISO14001:2015 environmental management certificate and
OHSAS18001:2007 occupational health and safety management system
certificate
4. High-quality material:With strict supplier control and
raw-material inspection .make sure the product quality stable and
reasonable cost .offer high-quality fiber from well-know fiber
company . offer self-inspection and 3rd-party test report.
5. Service:One stop service at customer’s convenience,offer
solution based on customer's request .
6. Price:Reasonable cost based on quality guaranteed product .
